" Because there is a fine line between hobby
...and MENTAL ILLNESS!
"
(406) 728-4599
Sales@RoadlessGear.com

Trail-Creeper Super Finish Ring & Pinion Gears

Manufacturer: Trail Gear

Trail-Creeper Super Finish Ring & Pinions

Tired of waiting for your ring and pinions to break-inbefore towing or hitting the trail? Trail-Gear has your solution with our new Trail-Creeper™Super Finish Ring & Pinion Gears. Our Trail-Creeper™ Super Finish Ring& Pinion Gears require absolutely no break-in time. You can install thesegears and get right into the action without the need to worry about prematurering and pinion failure.

Trail-Creeper™ Super Finish Ring & Pinion Gearsare made from tool-grade 8620 steel and heat-treated for maximum strength andwear resistance. The gear teeth are cut using Gleason CNC hobbing machines& cutters. Gleason gear-cutting technology produces an unprecedentedlevel of accuracy and surface finish, which allows the gears to transmit moretorque and improve fuel efficiency.

Key Benefits:

  • Nobreak-in period
  • Lessfriction
  • Reducedwear allowing bearings and gears to last longer

Trail-Creeper™ Super Finish Ring& Pinion Gears are treated with REM® Isotropic Super Finishing(ISF®) process. The process that is used to polish our gears isthe same used for aerospace applications. The REM® Isotropic Super Finishing (ISF ®) process removes themicroscopic peaks in the material and creates a surface on the ring and piniongears with a roughness of less than 10 µin Ra! This means that there is less frictionbetween the gears, reducing wear by 95% and allowing the gears and bearings torun cooler and last longer.

The REM® Isotropic Super Finishing (ISF®) process not only decreases friction and wear in the gears, but itcreates a non-directional surface that increases lubricant retention on thegear surface, reducing lubrication requirements. 

REM® and ISF® are registeredtrademarks of REM Chemicals, Inc. All Rights Reserved.

Specifications:

  • Made from tool-grade 8620 steel
  • Heat-treated for maximum strength and wear resistance.
  • Gear teeth are cut using Gleason CNC hobbing machines and cutters
  • Nobreak-in period
  • Lessfriction
  • Reducedwear allowing bearings and gears to last longer
  • Treated with REM® Isotropic Super Finishing (ISF®) process
  • The REM® Isotropic Super Finishing (ISF ®) process removes the microscopic peaks in the material and creates a surface on the ring and pinion gears with a roughness of less than 10 µin Ra! This means that there is less friction between the gears, reducing wear by 95% and allowing the gears and bearings to run cooler and last longer
  • Non-directional surface that increases lubricant retention on the gear surface, reducing lubrication requirements

Application Data

  • 1979-1995 Toyota Pickup (All Engines)
  • 1985-1995 Toyota 4Runner (All Engines)
TG301449-1 301449-1TG301453-1 301453-1TG301451-1 301451-1TG301450-1 301450-1TG301454-1 301454-1TG301452-1 301452-1
Picture of Trail-Creeper Super Finish Ring And Pinion, 5.29 Hip
Trail-Creeper Super Finish Ring And Pinion, 5.29 Hip
SKU: TG301454-1
Manufacturer part number: 301454-1
$242.10
Picture of Trail-Creeper Super Finish Ring And Pinion, 4.88 V6
Trail-Creeper Super Finish Ring And Pinion, 4.88 V6
SKU: TG301451-1
Manufacturer part number: 301451-1
$242.10
Picture of Trail-Creeper Super Finish Ring And Pinion, 5.29 4Cyl
Trail-Creeper Super Finish Ring And Pinion, 5.29 4Cyl
SKU: TG301450-1
Manufacturer part number: 301450-1
$242.10
Picture of Trail-Creeper Super Finish Ring And Pinion, 4.88 Hip
Trail-Creeper Super Finish Ring And Pinion, 4.88 Hip
SKU: TG301453-1
Manufacturer part number: 301453-1
$242.10
Picture of Trail-Creeper Super Finish Ring And Pinion, 4.88 4Cyl
Trail-Creeper Super Finish Ring And Pinion, 4.88 4Cyl
SKU: TG301449-1
Manufacturer part number: 301449-1
$242.10
Picture of Trail-Creeper Super Finish Ring And Pinion, 5.29 V6
Trail-Creeper Super Finish Ring And Pinion, 5.29 V6
SKU: TG301452-1
Manufacturer part number: 301452-1
$242.10