Trail Creeper Ring & Pinion Gears

*
$170.00

On Toyota trucks we recommend 4.88's for 33" tires and 5.29 for 35" and larger.

Fits 79-85 4WD Toyota axle 8" ring gear, and most 86-95 rear axles only.

 What R&P do you have in the rear axle of your 95-04 Tacoma?

  • If you have 6 lug wheels and a factory E-Locker, then you have an 8" R&P.
  • If you have 6 lug wheels and you do not have a factory E-Locker you have an 8.4" R&P.

What R&P do you have in the rear axle of your 2007-2011 FJ Cruiser?

  • If you have 6 lug wheels and a factory E-Locker, then you have an 8" R&P.
  • If you have 6 lug wheels and you do not have a factory E-Locker you have an 8.4" R&P.

Also available for DANA 60 Axles
The newest addition to the Trail-Creeper™ family of gears, the Trail-Creeper™ Dana 60 Ring and Pinion Gears are the strongest on the market. Competition tested, trail approved, these gears get you where you need to go and back again. We are offering them in the most popular ratios for rock crawling and rock racing applications.

 

FREE ADVICE:  OK - so maybe you wont buy your next set of gears from Roadless Gear.  Wish you would - but if you don't here is some advice on breaking in ANY new set of Ring & Pinion gears.  All new 3rd members require a break-in period to prevent damage from overheating. Any overloading or over-heating during this periods can cause the gear oil to break down resulting in ring & pinion failure.

  • After installation drive lightly for 20-30 minutes and then allow the diff to cool for at least two hours.
  • Avoid heavy throttle use during the first 500 miles.
  • Do not tow a trailer during the first 500 miles.
  • Change oil after 500 miles to remove any particles suspended in the oil.

This may seem unnecessary but it is very easy to damage the differential by loading it before the gear set is completely run in. New ring & pinion gears create excess heat when they are new. This excess heat can damage the heat treatment of the gears.

 

 

R&P, 4.11 4cyl Trail-Creeper (TG140361-1-KIT) R&P, 4.88 4cyl Trail-Creeper (TG140160-1) R&P, 5.29, 4cyl Trail-Creeper (TG140135-1) R&P, 4.88, V6 Trail-Creeper (TG140161-1) R&P, 5.29, V6 Trail-Creeper (TG140136-1) R&P, 4.88 High Pinion Trail-Creeper (TG140029-1) R&P, 5.29, High Pinion Trail-Creeper (TG140175-1) Dana 60 Ring & Pinion Gears D60-5.13 Thin (TG140292-KIT) Dana 60 Ring & Pinion Gears D60-5.38 Thiin (TG140293-KIT) Dana 60 Ring & Pinion Gears D60-4.56 Thick/Reverse Cut (TG140294-KIT) Dana 60 Ring & Pinion Gears D60-4.88 Thick/Reverse Cut (TG140295-KIT) Dana 60 Ring & Pinion Gears D60-5.13 Thick/Reverse Cut (TG140296-KIT) Dana 60 Ring & Pinion Gears D60-5.38 Thick/Reverse Cut (TG140297-KIT)