" Because there is a fine line between hobby
...and MENTAL ILLNESS!
"
(406) 728-4599
Sales@RoadlessGear.com

Longfield Studless Hub (Toyota)

Manufacturer: Trail Gear
SKU: TG302583-1-KIT
Manufacturer part number: 302583-1-KIT
PRICE:
Our price on this product is so insanely low, they won't allow us to show it to you until you add it to your cart. Don't worry - you can always remove it...

Longfield Studless Hubs

A new, innovative, never before seen product, our Longfield™Studless Hubs set the bar in quality and performance. The Longfield™ StudlessHub replaces the weaker, prone-to-breaking locking hubs, hub gears, and hubstuds by utilizing a stud-less hub design and inner locking puck. Chances are,if you were to break the studs in your hub, the threads would be damaged andthe hub would need to be replaced. With the Longfield™ Studless Hubs, you willnever again need to worry about your hubs, hub gears, and hub studs breaking onthe trail.

The Longfield™ Studless Hub and Inner Locking Puck are bothconstructed out of chromoly steel for superior strength and quality. TheLongfield™ Studless Hubs are stronger than the OEM locking hubs and aredesigned to handle even higher torque loads than our Creeper Drive Flanges. TheLongfield™ Studless Hubs will also include a full set of front wheel bearings toreplace your old, worn out bearings. The hub bodies are modeled exactly as the '83-'85 (late model). They accept stock '83-'85 solid rotors as well as FJ60 Vented Rotors (TG part #140332-1-KIT).

Note: If you are replacing 1979-1981 Toyota Pickup hub bodies, you will need the following additional parts:

  • FJ60 Vented Rotors (part #140332-1-KIT)
  • BrakeCalipers (part #140444-1-KIT & 140445-1-KIT)
  • Brake Pads (part #140091-1-KIT)
  • Front Wheel Studs (part #140392-1-KIT) (if needed)

Note: These will lockyour front axle into 4WD.

Specifications:

  • Stud-less hub design and inner locking puck
  • Studless Hub and Inner Locking Puck are both constructed out of chromoly steel
  • Stronger than the OEM locking hubs and are designed to handle even higher torque loads than our Creeper Drive Flanges

Note: If you are replacing 1979-1981 Toyota Pickup hub bodies, you will need the following additional parts:

  • FJ60 Vented Rotors (part #140332-1-KIT)
  • Brake Calipers (part #140444-1-KIT & 140445-1-KIT)
  • Brake Pads (part #140091-1-KIT)
  • Front Wheel Studs (part #140392-1-KIT) (if needed)

Note: These will lock your front axle into 4WD.

Application Data

  • 1979-1985 Toyota Pickup, 4WD with Solid Axle
  • 1985 Toyota 4Runner, 4WD with Solid Axle
  • Rock Assault Front Axle Housing

Note: On 1979-1981 Toyota Pickups, you will need the following additional parts:

  • IFS Vented Rotors (part #140332-1-KIT)
  • IFS Calipers (part #140444-1-KIT & 140445-1-KIT)
  • IFS Caliper Brake Pads (part #140091-1-KIT)
  • Front Wheel Studs (part #140392-1-KIT)

TG302583-1-KIT 302583-1-KIT